Find the Right Centrifuge Filter

Compare formats by sample volume and centrifuge setup, then check membrane properties and chemical compatibility.

Compare Spin Filter Formats

FormatMax. sample volumeHold-up volumeMax. forceFilter OD × lengthReceiver OD × length
Nano450 µL<2 µL10,000 × g8.87 × 28.53 mm10.38 × 37.97 mm
Micro850 µL<5 µL10,000 × g8.13 × 23.64 mm10.55 × 38.10 mm
Midi5 mL<10 µL5,000 × g13.35 × 67.80 mm16.8 × 120 mm
Maxi25 mL<20 µL2,500 × g24.6 × 60 mm29.3 × 114.5 mm

OD means outside diameter. Nano and Micro use 3 mm and 7.02 mm membranes, respectively. Maxi uses a fixed-angle rotor and is listed for operation up to 50 °C. Confirm the specifications and rotor fit for your selected item.

Membrane Selection Guide

Nylon

Hydrophilic with broad chemical compatibility. An option for aqueous clarification and HPLC sample preparation.

Polypropylene (PP)

Hydrophobic with low extractables. Consider for compatible solvents, low-wavelength HPLC detection, or ion chromatography.

Cellulose Acetate (CA)

Hydrophilic with low protein binding. Consider for protein- or enzyme-containing samples.

PTFE

Hydrophobic and compatible with many aggressive solvents. Check the rating for the specific chemical and concentration.

Nitrocellulose

Hydrophilic with high binding capacity. An option for aqueous clarification and particulate capture.

Polyethersulfone (PES)

Fast flow, low protein binding, and low extractables. An option for aqueous or protein-containing samples.

Polyvinylidene Fluoride (PVDF)

Hydrophilic with low extractables and low protein binding. No wetting agent is required. Applications include HPLC mobile-phase filtration, GC sample preparation, and clarification of protein-containing samples.

  • Listed pore sizes are 0.22 and 0.45 µm.
  • USP Class VI testing passed.
  • BSA protein binding is approximately 4 µg/cm².
  • Membrane thickness is 110–125 µm.
  • Maximum membrane operating temperature is 85 °C (185 °F).
  • Listed membrane sterilization methods are gamma irradiation and ethylene oxide (EtO).
Pore size in test tableWater flow¹Air flow²Bubble point
0.20 µm7.02.056.0 psi
0.45 µm29.04.025.0 psi

¹ Water flow in mL/min/cm² at 13 psi. ² Air flow in L/min/cm² at 10 psi.

The source lists 0.22 µm in the product description and 0.20 µm in its performance table. Confirm the rating for the selected item before applying those figures.

Regenerated Cellulose (RC)

Hydrophilic, asymmetric cellulose membrane reinforced with nonwoven cellulose. It wets spontaneously without a wetting agent and combines good wet strength with low adsorption, protein binding, and extractables. The source lists pH 3–12 for the membrane and describes use for particle removal from compatible aqueous and organic solvents.

Pore sizeThicknessBubble pointWater flow (mL/min/cm²/bar)
0.2 µm170 µm4.4 bar15
0.45 µm170 µm2.9 bar30

Separate 1 µm Membrane Reference

The source also lists a hydrophilic, autoclavable 1 µm cellulose membrane with an air-flow test result of 12.5 seconds per 100 mL at 3 mbar differential pressure and a water-flow result of 3 seconds per 100 mL through 12.5 cm² at 0.9 bar differential pressure.

Membrane properties and test values apply to the membrane itself. Confirm limits and sterilization options for the assembled filter device separately.

Membrane Chemical Compatibility

C Compatible · L Limited · N Not compatible · – No data

Ratings are reproduced from Ciro’s supplied reference chart at the listed concentrations. Confirm suitability for your exact membrane grade, assembled device, and operating conditions. The chart lists polysulfone, which is distinct from polyethersulfone (PES).

Acids (11)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Acetic, 25%LCCCLCC
Acetic, GlacialLCCCNCC
Formic, 25%NCCCLCC
Hydrochloric, 25%LCCCCCC
Hydrochloric, ConcentratedNNCCNCC
Sulfuric, 25%NCCCNCC
Sulfuric, ConcentratedNCLNNCL
Nitric, 25%NCLLLCC
Nitric, ConcentratedNCLNNLN
Phosphoric, 25%NCCCCCC
Trichloroacetic, 10%LCCCCCC
Bases (2)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Ammonium Hydroxide, 25%CCLCCC–
Sodium Hydroxide, 3 NormalCCCCNC–
Alcohols (11)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Amyl AlcoholCCCCNCC
Benzyl AlcoholCCCNLCC
Butyl AlcoholCCCCCCC
Ethanol, 70%CCCCCCC
Ethanol, 98%CCCCCCC
Ethylene GlycolCCCCCCC
Glycerine (Glycerol)CCCCCCC
IsopropanolCCCCCCC
Methanol, 98%CCCCCCC
n-PropanolCCCCCCC
Propylene GlycolCCCCLCC
Hydrocarbons (5)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
BenzeneCCCNCNC
Hexane, XyleneCCCNCLC
Kerosene, GasolineCCCLCLC
Tetralin, DecalinCCCNCL–
TolueneCCCNCLC
Halogenated Hydrocarbons (7)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Carbon TetrachlorideCCCNLLC
Chlorobenzene (Mono)CCCLCCC
ChloroformLCCNNLC
FreonCCCLCCC
Methylene ChlorideLCCNNLC
TrichloroethaneCCCNLLC
TrichloroethyleneCCCNCLC
Ketones (5)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
AcetoneCCNNNCC
CyclohexanoneCCNNNCC
IsopropylacetoneCCNNC––
Methyl Ethyl KetoneCCLNLCC
Methyl Isobutyl Ketone (MIBK)CCNNCLC
Esters (11)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
2-Ethoxyethyl AcetateLLLNL–C
Amyl AcetateCCCNLLC
Benzyl BenzoateCC–NC–C
Butyl AcetateCCCNLLC
Ethyl AcetateCCCNNLC
Isopropyl MyristateCC–NC–C
Methyl AcetateLCLNNLC
Propyl AcetateLNCNNLC
Propylene Glycol AcetateLC–NNCC
Methyl Cellosolve AcetateCCCNNCC
Tricresyl Phosphate–C–NC–C
Oxides — Ethers (9)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Acetonitrile (Methyl Cyanide)CCCNNCC
AnilineLCCNNLC
Diethyl AcetamideCCC–N–C
Dimethyl FormamideCCNNNCL
Dimethyl Sulfoxide (DMSO)LCCNNCL
DioxaneCCLNNCL
Ethyl EtherCCCCLLC
Isopropyl EtherCCNCCC–
PyridineCCLNNLC
Solvents with Nitrogen (2)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
TetrahydrofuranCCLNNCL
TriethanolamineCCC–C–C
Miscellaneous (4)
ChemicalNylonPTFEPVDFPolysulfoneCellulose AcetatePolypropyleneRegenerated Cellulose
Formaldehyde Solution, 30%CCCCLCL
Hydrogen Peroxide, 30%NCCCCCC
Phenol, Aqueous, 10%NCLNNCC
Silicone Oil & Mineral OilCCCCCCC

Application Notes

Ciro’s spin filters use polypropylene housings and graduated receiver tubes. On applicable models, the cap closes the sample chamber during centrifugation and the receiver tube afterward. Filtration rate varies with sample viscosity, concentration, temperature, and centrifugal force. Products ship non-sterile and can be stored at ambient temperature.

Need Help Choosing a Filter?

Share your sample volume, chemistry, desired pore size, and centrifuge or rotor model.

Talk to Ciro